意大利菲亞姆鉛酸蓄電池維護方法有哪些?

非凡蓄電池應保持清潔【非凡蓄電池】
Special batteries should be kept clean
經常保持蓄電池外表及工作環境清潔、干燥狀態。
Keep the battery appearance and work environment clean, dry state.
蓄電池的清潔應避免產生靜電；【非凡蓄電池】
Cleaning should avoid static battery;
用濕布清潔蓄電池，禁止使用汽油、酒精等有機溶劑，也不要使用含這些物質的布抹電池�！痉欠残铍姵亍�
Use the wet cloth to clean the battery, the prohibition of the use of gasoline, alcohol and other organic solvents, also do not wipe the battery containing these substancescloth.
檢查與維護【非凡蓄電池】
Inspection and maintenance
為了了解電池和設備的運行狀況和防止檢查過程中電池意外損壞，機房UPS系統蓄電池、基站（包括室外MBO）和光纜無人站UPS系統的蓄電池維護作業項目及周期按下列方法定期檢查電池并做記錄。
In order to understand the running status of the battery and equipment and prevent battery inspection process of accidental damage, room UPS system of storage battery, the base station (including outdoor MBO) battery UPS system and cableunmanned station maintenance items and period according to the following method toperiodically check the battery and make records.
1）.在進行蓄電池檢測時要遵循“查隱患、保安全”的原則；【非凡蓄電池】
1). In the detection of battery time to follow the "find hidden danger, ensure safety" principle;
2）.要嚴格按照作業計劃執行蓄電池的日常維護作業項目和性能分析�！痉欠残铍姵亍�
2). Must be strictly in accordance with the analysis of daily maintenance work andperformance of project operation plan implementation of battery.
3）.嚴格遵循維護規程和蓄電池相關要求進行蓄電池的參數設置和相關操作。【非凡蓄電池】
3). Strictly follow the relevant requirements of maintenance procedures andaccumulator battery parameter setting and related operations.
4）.做好安全防護工作，要戴好絕緣手套，并將金屬工具進行絕緣處理�！痉欠残铍姵亍�
4). Do a good job security, good to wear insulated gloves, and the metal toolsinsulation treatment.
5）.使用符合檢測要求的工具、儀表�！痉欠残铍姵亍�
5). Used to meet the requirements of the tool, instrument.
6）.物理性檢查項目
6). The physical examination project
(1)檢查極柱、連接條是否清潔，有否氧化或腐蝕現象，如情況嚴重，應作清潔及降阻處理。
(1) check the pole, the connecting strip is clean, there is no oxidation or corrosionphenomenon, if severe, should be clean and resistance reduction treatment.【非凡蓄電池】
(2)檢查連接處有無松動，如有，應緊固。
(2) check for loose connections, if have, should be secured.
(3)檢查蓄電池極柱有否爬酸、漏液，安全閥周圍是否有酸液逸出。
(3) check the battery pole columns have not climbed acid, liquid leakage, safety valvearound whether there is acid escape.
(4)檢查蓄電池殼體有無損傷、滲漏和變形，極柱有無損傷、變形。
(4) check the battery shell with and without deformation damage and leakage, polewithout damage, deformation.
(5)檢查蓄電池及連接處溫升有無異常。
(5) check the battery and junction temperature rise has no abnormal.
7）相關參數設置的檢查和調整
7) check and adjust the related parameters setting
(1)根據蓄電池的技術參數和現場環境條件，檢查蓄電池的浮充、均充電壓、浮充電流是否正常，發現異常及時處理。
(1) battery according to the technical parameters and the field environmental conditions, check whether the battery float charging voltage, charge current, normal,abnormal timely treatment.
(2)檢測蓄電池組的充電限流值設置是否正確，發現異常，及時調整。
(2) the detection of battery charging current limit value is set properly, abnormal,timely adjustment.
(3)檢測蓄電池組的告警電壓（低壓告警、高壓告警）設置是否正確，發現異常，及時調整。
(3) battery voltage detection alarm (low voltage alarm, high pressure alarm) settings are correct, abnormal, timely adjustment.
(4)如設有蓄電池組脫離負載裝置，應檢測蓄電池組脫離電壓設置是否準確，發現異常，及時調整。
(4) as a battery from the load device, battery voltage should be detected from settings are accurate, abnormal, timely adjustment.